OpenFOAM Advanced - Winter (Online)
|
Winter session (Online) - 2024 |
|
|
Dates |
Course description |
|
FEB 5 - 7 - 9 |
Basic solid modeling for CFD using Onshape and mesh generation using OpenFOAM tools * |
|
FEB 12 - 14 - 16** |
Turbulence modeling in general CFD and OpenFOAM - Theory and applications |
|
FEB 19 - 21 - 23** |
Multi-phase flows modeling in general CFD and OpenFOAM - Theory and applications |
|
MAR 4 - 6 - 8** |
Introduction to the FVM method. Standard practices in general CFD with applications to OpenFOAM |
|
MAR 11 - 13 - 15** |
Moving meshes, rigid body motion, adaptive mesh refinement, and overset meshes |
|
MAR 18 - 20 - 22** |
Design of experiments, space exploration, and numerical optimization using Dakota and code coupling Dakota-OpenFOAM |
|
MAR 26 - 28 *** |
Introduction to meshing using Ennova CFD - OpenFOAM case setup with Ennova GUI |
|
* The first day is dedicated to solid modeling and basic meshing, and the other two days are dedicated to only meshing. ** Review session + Q&A session *** This module is free. Seats are limited to 10. A one-month demonstration license will be provided to all attendees. Participants who have reserved at least one training module will be given priority consideration. To book a seat send an email to
This email address is being protected from spambots. You need JavaScript enabled to view it.
All the sessions are conducted using OpenFOAM 11
For more information please send an email to This email address is being protected from spambots. You need JavaScript enabled to view it. |
|
| Fees | |
|---|---|
| 1 Module | 350 Euros + VAT |
| 2 Modules | 700 Euros + VAT |
| 3 Modules | 1050 Euros + VAT |
| 4 Modules | 1400 Euros + VAT |
| 5 Modules | 1750 Euros + VAT |
| 6 Modules | 2100 Euros + VAT |
Info. We are offering a 15% discount to all participants taken more than two modules. If you take five or more modules the discount is 25%. The cost of each module is 350 Euros (taxes included).
Prerequisites: intermediate knowledge of CFD, OpenFOAM, and Linux is required. Some basic knowledge of C++ and shell scripting is beneficial. For those following the optimization training, no prior knowledge of Dakota is required.
Time-zone: Central European Time (CET).
Course times: to maximize users participation in different time-zones, the courses will start at 2:00 pm CET and will end at 5:30 pm CET. Each training session will be split into three non-consecutive days. Two days dedicated to lectures and guided tutorials, and one additional day devoted to a general review and Q&A. A 20 minutes break is included in every session.
Language: English
Number of seats: minimum 2 seats - maximum 15 seats.
Training material: every participant will have access to the lecture notes (in pdf format) and all the supporting material (tutorials and videos).
Teaching method: lectures and hands-on sessions to validate the acquired knowledge.
Additional information:
Cancellations will not be accepted.
The course is delivered live. However, all sessions will be recorded.
Attendees are required to have all applications installed.
To maximize the learning process, it is recommended to use two devices. One device to run all tutorials and the other device to follow the online meeting.
Before starting the course and to ease the learning experience, all participants will get access to short pre-recorded lectures introducing the course and addressing key topics.
To deliver the training, we will use Zoom online conferencing applications, which is free on the client side.
A training certificate is provided to all attendees who complete the course.
Support to install the required applications can be provided at a nominal price. Send us an email for more information.
We reserve the right to cancel a course if the minimum forum is not reached or due to undisclosed issues. In such a case, the registered participants will be notified ten days before the starting date and refunded 100%.
OpenFOAM introductory training - Self-paced and do it at anytime, and free.
Disclaimer
Wolf Dynamics makes no warranty, express or implied, about the completeness, accuracy, reliability, suitability, or usefulness of the information disclosed in this training material. This training material is intended to provide general information only. Any reliance the final user place on this training material is therefore strictly at his/her own risk. Under no circumstances and under no legal theory shall Wolf Dynamics be liable for any loss, damage or injury, arising directly or indirectly from the use or misuse of the information contained in this training material.