OpenFOAM Advanced - Summer (Online)
Due to the COVID19 pandemic, all classroom sessions have been reprogrammed online.
|
Summer session (Online) - 2020 |
|
|
Dates |
Course description |
|
JUL15-17 2020 |
Turbulence modeling in general CFD and OpenFOAM® - Theory and applications |
|
JUL20-22 2020 |
Multi-phase flows modeling in general CFD and OpenFOAM® - Theory and applications |
|
JUL24-27 2020 |
Introduction to the FVM method. Standard practices in general CFD with applications to OpenFOAM® |
|
JUL29-31 2020 |
Introduction to solid modeling for general CFD and meshing using OpenFOAM® technology - Onshape and snappyHexMesh |
|
AUG3-5 2020 |
|
|
AUG7-10 2020 |
Moving meshes, rigid body motion, adaptive mesh refinement, and overset meshes. |
|
For more information please send an email to This email address is being protected from spambots. You need JavaScript enabled to view it. |
|
| Fees | |
|---|---|
| 1 Module | 250 Euros + VAT |
| 2 Modules | 500 Euros + VAT |
| 3 Modules | 750 Euros + VAT |
| 4 Modules | 1000 Euros + VAT |
| 5 Modules | 1250 Euros + VAT |
| 6 Modules | 1500 Euros + VAT |
Info. We are offering a 20% discount to all participants, this is part of our COVID19 relief package.
Prerequisites: intermediate knowledge of CFD, OpenFOAM®, and Linux is required. Some basic knowledge of C++ and shell scripting is beneficial. For those following the optimization training, no prior knowledge of Dakota is required.
Time-zone: Central European Time (CET).
Course times: to maximize users participation in different time-zones, the courses will start at 2:00 pm CET and will end at 5:30 pm CET. Each training session will be split into two non-consecutive days.
Language: English
Number of seats: minimum 2 seats - maximum 7 seats.
Training material: every participant will have access to the lecture notes (in pdf format) and all the supporting material (tutorials and videos).
Teaching method: lectures and hands-on sessions to validate the acquired knowledge.
Additional information:
Cancellations will not be accepted.
The course is delivered live. However, all sessions will be recorded.
Attendees are required to have all applications installed.
To maximize the learning process, it is recommended to use two devices. One device to run all tutorials and the other device to follow the online meeting.
To deliver the training, we will use Cisco WebEx or Zoom online conferencing applications, which are free on the client side.
For remote control, we will use anydesk, which is free on the client side.
A training certificate is provided to all attendees who complete the course.
Support to install the required applications can be provided at a nominal price. Send us an email for more information.
If you are looking for basic OpenFOAM® training, take a look at our OpenFOAM® Introductory Training.
Disclaimer
Wolf Dynamics makes no warranty, express or implied, about the completeness, accuracy, reliability, suitability, or usefulness of the information disclosed in this training material. This training material is intended to provide general information only. Any reliance the final user place on this training material is therefore strictly at his/her own risk. Under no circumstances and under no legal theory shall Wolf Dynamics be liable for any loss, damage or injury, arising directly or indirectly from the use or misuse of the information contained in this training material.